Power planning

LED strip power supply calculator

Estimate strip load, current and the minimum constant-voltage power supply rating using your selected model’s rated power.

Project inputs

Size a strip power supply

Enter the selected strip’s rated maximum values. This estimate covers a single-voltage group.

Planning result

Power supply estimate

Enter the rated strip values and calculate to see watts and amps.

This does not determine wire size, fusing, power injection spacing, inrush or thermal derating. Confirm the selected supply’s datasheet, environment and local installation requirements. For feeder loss, use the voltage drop calculator.

How to calculate LED strip power supply size

Enter the combined length powered by one supply, the maximum rated watts per metre from the selected strip datasheet, its DC voltage and the extra reserve you want to add. The calculator handles one voltage group at a time; calculate separate groups individually.

Connected load (W) = length (m) × rated power (W/m). Load current (A) = load (W) ÷ voltage (V). Minimum supply rating = load × (1 + added reserve ÷ 100). The result is a starting capacity, not a selected model or a complete electrical design.

Worked example: 10 metres at 24 V

For 10 m rated at 12 W/m, the connected load is 120 W. At 24 V, that is 5 A. Adding 20% to the load gives a minimum 144 W and 6 A rating. Choose a regulated constant-voltage supply that matches the strip voltage and meets the calculated output requirements after any applicable derating.

A 20% addition to the load does not mean the load is 80% of the supply rating: 120 ÷ 144 is about 83%. The reserve is adjustable because the selected supply’s datasheet and installation conditions determine the appropriate design margin.

Before selecting a power supply

Confirm the exact strip’s full-load rating, supply output voltage, ambient temperature, input voltage, enclosure, cooling and manufacturer’s derating curve. For multiple supplies, allocate loads individually and follow the manufacturers’ instructions for isolation and connection.

Power capacity does not determine conductor size, fuses, inrush current, connector limits or where to inject power. Check voltage drop and the complete distribution design separately with a qualified installer.

Frequently asked questions

Can I use this for RGBW and addressable strips?
Yes, when you enter the actual model’s maximum rated W/m and supply voltage. Colour mode and pixel grouping can affect power; do not substitute a generic watts-per-pixel value for the datasheet.
Does a larger power supply eliminate voltage drop?
No. Cable resistance, current, connection method and strip construction still affect voltage at the load. Use the voltage-drop calculator and check the manufacturer’s installation limits.

Continue planning your project

Reference: MEAN WELL: power-supply derating guidance. Confirm design assumptions with current equipment documentation.