Facade Lighting Handover: Proof, Not Paperwork
A facade lighting handover is an evidence pack, not a folder: how to test measured lux, batch color match, IP joints, the DMX universe map and spares.
Facade and Curtain Wall Lighting: A Specifier's Guide
Specifying facade and curtain-wall lighting: IP class, pixel pitch, power injection layout, and the handover evidence clients ask for.
Facade & Curtain Wall
Architectural LED Lighting vs Decorative Strip
Architectural LED lighting is a system you specify; a decorative LED strip is a reel you buy. The eight questions that decide whether a line survives a facade.
Wall Wash Distance From Wall: How Far?
Set a wall washer a quarter to a third of the wall height from the wall, then space fixtures at roughly that same distance. Here is how far, and how often.
LED Point Lights for Facades: Spacing and Addressing
How to space and address LED point lights on a facade: viewing distance to node pitch, DMX universe and SPI data limits, and where the power zones fall.
Curtain Wall Power Layout: Injection Points
Plan LED curtain wall power layout before you wire: voltage budget, load current per zone, injection point spacing, wire gauge, and a full 40 m worked example.
Facade Lighting Specs: IP, Pixel Pitch, Power
How to spec facade pixel lighting: IP rating by exposure, pixel pitch by viewing distance, and power injection layout before voltage drop dims the far end.
Talk to an engineer
Specifying pixel LED for a real project?
Send the spec — pitch, IC, IP class, run length, voltage — and you get an engineer's answer, not a catalogue. Samples and OEM/ODM quotes from the Shenzhen factory floor.